Who We Are

About

A local deck builder serving homeowners across Arlington, TX.

Home › About Us
Oakmont Deck Co crew
Our Story

How We Got Into Building Decks

We build, repair, and refinish decks for homeowners in Arlington and the surrounding towns, the kind of work that started with fixing our own problems with rotten joists and bad ledger flashing. Most of what we know came from pulling apart decks that failed and figuring out why.

If you're on this page, chances are a board's gone soft, the rail wobbles, or the deck just looks tired and gray. We check the framing before we touch the surface, because a stain job or new boards over a rotten joist just hides the problem for another season. What we're really trying to do is make sure the deck is still solid five years from now, not just the day we leave.

10+
Years Experience
500+
Projects Completed
12
Cities Served
Why Choose Us

What you get when you hire us

None of this is complicated. It is mostly just doing what we said we would do.

Licensed & Insured

You won't have a lien or liability headache if a post footing cracks or a tool gets left on your roof. Ask for the certificate before we start, we hand it over without hesitation.

Straight Answers on Permits

A deck more than 30 inches off the ground usually needs a permit and an inspection in Tarrant County, and we handle that paperwork ourselves. Skipping it can cost you when you sell the house and the buyer's inspector asks for it.

We Clean Up After

Deck demo leaves a lot of splintered boards and bent nails behind, and we bag and haul it the same day we tear out. You shouldn't be the one finding screws in the lawn with a mower.

Written Quotes

The quote breaks down decking material, framing lumber, hardware, and labor separately, so you can see where the money goes. No verbal estimates that turn into a different number on the invoice.

Own Crew

We don't hand your job to a rotating set of subcontractors who've never met each other. The same guys who set the posts are the ones putting down the boards and hanging the rail.

Local to Arlington

North Texas clay shifts enough to crack a poorly set footing within a couple of seasons, and the sun here fades untreated wood fast. Building here every day means we size footings and pick finishes for that, not for a mild climate somewhere else.

Common Questions

Things people ask us

Questions about who you're actually hiring.

How long have you been building decks?
Specific experience details are best discussed directly when getting a quote, but deck building draws on hands-on framing, carpentry, and code knowledge specific to North Texas conditions like clay soil and summer heat swings. Asking about recent projects similar to a given job is a reasonable way to gauge experience.
Do you use your own crew or subcontractors?
An in-house crew handling framing, decking, and railing work directly, rather than subcontracting pieces of the job to separate crews who've never worked together, is common among smaller deck-focused contractors. That keeps the same people accountable for the whole deck from the first post hole to the final rail.
Can I see examples of past deck work?
Photos of completed deck installations, repairs, and railing work should be available on request, showing a range of materials from pressure-treated pine to composite decking. Seeing a completed deck of similar size and style helps set expectations for the finished look.
Why hire a smaller deck builder instead of a large remodeling company?
A smaller, deck-focused contractor spends every workday on decks specifically, which usually means more direct knowledge of joist spans, flashing details, and local code than a general remodeler who builds a deck once a year among kitchens and bathrooms. That focus also tends to mean more direct communication, without layers of project managers between the homeowner and the crew doing the work.
Where are you based?
Oakmont Deck Co is based in Arlington, TX, and works throughout the surrounding Dallas-Fort Worth area. Being local means familiarity with Tarrant County permit requirements and the clay soil conditions that affect footing depth.
How far in advance do I need to book?
Spring and early summer fill up fastest for deck builders in North Texas, so booking four to six weeks ahead during those months is reasonable. Fall and winter typically have more open scheduling, and deck framing can proceed in cooler weather without issue.
Do you clean up the job site when the work is done?
Yes, old decking material, cut-off lumber, and packaging from new materials should be hauled away at the end of the job, not left for the homeowner to dispose of. The yard should look clean aside from the new or repaired deck itself.
What happens if something gets damaged during the project?
A licensed and insured deck contractor carries liability coverage for accidental damage to the home, fencing, or landscaping that happens during construction. Confirming insurance coverage upfront and getting it in writing before work begins is worth doing rather than assuming it's included.
Will you finish a deck another contractor started or abandoned?
Taking over a partially built deck is possible, but it starts with inspecting the existing framing, footings, and ledger attachment to confirm they meet code before building on top of someone else's work. Sometimes that means redoing footings or ledger flashing that wasn't done correctly the first time, which adds cost but prevents bigger problems later.
How can I tell if the deck work is being done correctly?
Check that footings are poured to the required depth, the ledger board is flashed and bolted, not just nailed, to the house, joist hangers are the correct size for the lumber, and railing posts are bolted through the rim joist rather than just screwed to the decking. A county inspection for permitted decks is also a good checkpoint, since it confirms the structural work independently.

Got something that needs doing?

Free estimate, a price in writing, and work we stand behind.

Call (469) 871-5152